Gold Trommel For Sale In Alaska

Gold Trommel troubleshooting method

In the production of Gold Trommel, if the Gold Trommel fails, it will seriously delay the production process, causing no small trouble to the user. Therefore, in use, the user should have some understanding of some basic faults. To make the problem solved.

Before the official use of the mill, it is necessary to carry out normal commissioning work for him, so that the work can be carried out very well. However, during the commissioning of the Gold Trommel, because it has not been officially put into production, it is easy to cause some accidents, resulting in the Gold Trommel not being able to produce normally. What should we do?

First, the Gold Trommel bearing heat problem: During the empty load operation, the moving roller motor output shaft bearing temperature rises to 69 °C and still cannot be balanced. At this time, it is necessary to stop the inspection. Due to the dry discharge of the used grease, the through hole of the bearing waste grease is blocked, causing the dry oil of the bearing box to exceed the standard amount of use, so that the generated heat cannot be dissipated, resulting in an increase in the bearing temperature. . In order to solve this problem, it is very likely that the bearing of the Gold Trommel should be re-cleaned and replaced with new grease. At the same time, after checking whether the dry oil circuit is normal, restart the Gold Trommel for empty load test operation.

Secondly, the quality of the cake is poor: at the time of production, the material containing a large amount of fine powder leaks a large amount from both sides of the roller of the Gold Trommel powder machine, which indicates that the actual crushing effect of the Gold Trommel is very poor. However, it can be solved by checking the grinding roller device of the mill and making adjustments.

Thirdly, the vibration is large: the vibration of the mill is very large during the test run, and the vibration speed of the main reducer is measured beyond the normal range by monitoring the vibration device, so it is necessary to stop the inspection. In fact, in the production, the Gold Trommel vibrates greatly, resulting in the system not working properly, which greatly affects the output of the Gold Trommel powder machine: at this time, the user should carefully check the cooperation of each component, check one by one, find the cause and solve .

After comparison, the hydraulic crusher of the Gold Trommel has the problem of oil leakage: during production, due to the instability of the flow and the operation, the working pressure of the mill is excessively large and frequently fluctuated for a long time, resulting in the cylinder block and the seal. The ring splits and leaks oil, causing the pressure to be small or even no pressure, which affects the output of the stage or stops. Such a phenomenon will only delay production, so in the production, the user evenly feeds, the operation is smooth, and the stability of the Gold Trommel is maintained.

Get Price And Support

Simply complete the form below, click submit, you will get the price list and a SBM representative will contact you within one business day. Please also feel free to contact us by email or phone. ( * Denotes a required field).