Kaolin Processing

Analysis of the causes of blocking phenomenon of Kaolin Processing Machine


There are many reasons for the Kaolin Processing Machine blocking, but the common ones can be divided into the working imbalance of the Kaolin Processing Machine. When the nature of the ore is changed, or the ore is increased or the coarse grain is increased, the return is increased. When the sand ratio is exceeded, the coal plugging problem occurs due to the passing capacity of the Kaolin Processing Machine itself. Then the problem of coal blocking caused by improper operation. The cinder pulverizer, for example, the improper use of grinding water, directly affects the grinding concentration, and the excessive grinding concentration may cause coal-blocking problems. There is also the unreasonable amount of the total amount of the grinding media or the ratio of the ball diameter to cause the problem of coal plugging.

Its common characteristics are: the main motor current meter of coal gangue crusher indicates that the current is decreasing; the Kaolin Processing Machine discharges the large block, the slurry is poured out; the shale crusher classifier overflows & ldquo; runs coarse & rdquo; The amount of sand increased significantly; the operation of the coal gangue grinder Kaolin Processing Machine was dull, and the impact of the steel ball could hardly be heard.

In the face of the phenomenon of coal plugging in Kaolin Processing Machines, we must first analyze the changes in the nature of ore, whether the ore, water supply, sand return, and overflow particle size are normal, and find out the reason, & ldquo; the right medicine.

1. Reduce the amount of Kaolin Processing Machine feeding or stop the coal slime dryer in a short time. This can reduce the working load of the Kaolin Processing Machine and reduce the amount of minerals passed by the Kaolin Processing Machine.

2, adjust the water consumption grinding concentration: - must be strictly controlled, too large or too small will have a bad impact. When the concentration is too high, the slurry flow rate is slow, and the impact of the grinding medium is weakened. For the overflow type Kaolin Processing Machine, the size of the ore discharge becomes thicker, while the lattice Kaolin Processing Machine may appear “inflated belly”. ;phenomenon.

3. The coal gangue pulverizer is reasonably added to the grinding medium. If the loading amount of the medium in the Kaolin Processing Machine is insufficient, the grinding medium of an increased size should be appropriately supplemented.

The above is the analysis of the reasons for the phenomenon of blocking the Kaolin Processing Machine by Shanghai Shibang. If you have any questions, please feel free to contact us!

Get Price And Support

Simply complete the form below, click submit, you will get the price list and a SBM representative will contact you within one business day. Please also feel free to contact us by email or phone. ( * Denotes a required field).