Scrap iron crusher operation

Scrap iron crusher operation method

The scrap iron crushing process uses the crusher to crush the scrap iron, and the sorting system is used to sort the crushed scrap iron to obtain a pure high-quality scrap iron processing method. Its working principle is that under the continuous drive of high-speed, high-torque motor, the hammer on the rotor of the crusher alternately hits the scrap iron into the cavity. Under strong impact, the scrap iron is torn and extruded into certain specifications. The broken steel is processed by the sorting equipment to obtain high quality broken steel with high purity.

1. Check:

Before use, check whether the grinding machine feet are all grounded and stable; whether the locking bolts are locked; whether the crusher filter is intact; whether the connecting parts such as the belt guard are tight. It is confirmed that all of them can be used after they are normal, otherwise they should be repaired or reported.

2, start:

Close the power supply of the distribution box, the indicator light is on, press the button and the pulverizer starts. Observe the current of the crusher and the running sound. If there is any abnormality, stop the maintenance immediately.

3. Feeding:

After confirming that the pulverizer is operating normally, it can be fed. When feeding, pour the material into the hopper first, and gently push the material into the pulverizer with a fine wooden stick. The material should not be too large or too thick. Put the pulverized fine material into the transfer barrel. After the barrel is full, immediately cover the inside of the plastic barrel and the outer cover to prevent the material from absorbing moisture. If you hear an abnormal sound during the pulverization process, you should immediately stop the maintenance and repair, and then restart the confederation. After the feeding is completed, the rotor should be idling for 2-3 minutes, so that the residual material can be completely pulverized and pulled out to stop by pressing the red button.

4, cleaning:

Since the material is very easy to absorb moisture, after the smashing is completed, the material of the pulverizer hopper and the fuselage should be swept out of the bag with a long brush, and the feeding part of the pulverizer is opened, and the pulverizer is used with wet linen or water. Clean up. Reinstall it after each cleanup. Open the heating radiator to ensure that the drying and pulverizer are dried before the next use.

Get Price And Support

Simply complete the form below, click submit, you will get the price list and a SBM representative will contact you within one business day. Please also feel free to contact us by email or phone. ( * Denotes a required field).